Fleetwood FWD V8-300 4.9L (1993)
1.
The front fenders used on 1993 DeVilles and Fleetwoods are made of a rigid plastic nylon material known as GTX 917.
2.
Procedures and materials for GTX 917 plastic fender are the same as those used on rigid SMC or sheet metal parts and do not require flex
agent additives.
G.
Xenoy
1.
Allante front and rear bumpers and DeVille lower accent moldings are made of Xenoy materials. Xenoy parts will be supplied in colors. Use
the same refinish procedures as on sheet metal parts for any required paint repairs.
H.
Minlon
1.
Center pillar hinge covers on the 1993 Seville are made of a rigid nylon material known as Minlon.
2.
Service parts will be supplied in prime, and refinish procedures should be the same as those used for sheet metal with no flex agents
required.
III.
BASE COAT REPLACEMENTS (BCR)
Base coat replacements, which are essentially color-keyed primers, are being utilized on 1993 DeVilles and Fleetwoods to improve the factory
processing of the vehicles. Specific areas that will be painted with the BCR exposed include:
A.
The Underside Of The Hood
B.
The Motor Compartment
^
Upper and lower radiator support
^
Front of dash panel
^
Shock towers
C.
Back Side Of The Fuel Door
D.
Rear Wheel Skirt Flange On The Fleetwood
Repairs to surfaces painted with BCR's should be done with base coat paint.
IV. REFINISH MATERIAL TABLES