cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

ABOUT US
Automatic Door Lock Controller <--> [Power Door Lock Control Module] > < Reprogramming Transmitter/Module

Fleetwood FWD V8-300 4.9L (1993)

Page 1
background image

Keyless Entry Module: Service and Repair
Keyless Entry Module

REMOVE OR DISCONNECT

1. Negative battery cable.
2. I/P compartment door.
3. Screws holding module.
4. Electrical connectors.

INSTALL OR CONNECT

1. Electrical connectors.
2. Screws holding module and tighten to 1.5 Nm (13 in lbs).
3. I/P compartment door.
4. Negative battery cable and tighten to 15 Nm (11 ft lbs).
5.  Program module.

Automatic Door Lock Controller <--> [Power Door Lock Control Module] > < Reprogramming Transmitter/Module