Fleetwood FWD V8-300 4.9L (1993)
1.
Remove the weatherstrip from the flange in the leak area.
2.
Straighten flange with pliers, if necessary.
3.
Apply a bead of sealer into the weatherstrip cavity, using a clear-type of sealer, for 4 to 6 inches either side of the leak area. Refer to Figure 3,
Section A-A.
4.
Reinstall the weatherstrip to the flange.
5.
As always, water test the area after the repair to ensure a satisfactory repair.
For vehicles repaired under warranty use Labor Operation B5410. Use published Labor Operation time.