Fleetwood FWD V8-300 4.9L (1993)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Crankshaft Balancer Replacement
CRANKSHAFT DAMPER
REMOVE OR DISCONNECT
1. Open hood and cover fenders.
2. Negative battery cable.
3. Serpentine belt.
4. Raise car on hoist.
5. Right front tire.
6. Right front air deflector.
7. Loosen and reposition heater by-pass line.
8. Lower passenger side engine cradle if needed for access.
9. Install puller pilot J 21052-4, in crankshaft bore.
10. Install Puller, J38416 (or equivalent 3 leg puller) on front of damper.