Fleetwood FWD V8-300 4.9L (1993)
Power Window Regulator And Express Down Module - Front Door
Regulator And Express Down Module
REMOVE OR DISCONNECT
1. Trim panel and water deflector.
2. Regulator to door inner panel rivets using a 6.3 mm (1/4") drill bit. Punch out rivet centers, then perform drilling operation.
3. Lock actuator linkage.
4. Regulator guide and block assembly from lower sash channel by positioning window half way down, and pushing regulator forward. Once
removed, tape glass in full up position.
5. Wire connector.
6. Regulator through access hole.
7. Module to door inner panel rivets.
8. Wire Connectors.
9. Module.
INSTALL OR CONNECT