Seville V8-273 4.5L (1989)
2. Water pump.
TIGHTEN
^
All water pump fasteners to specifications.
3. Water pump pulley and install screws finger tight.
4. Accessory drive belt.
5. Tighten 3 water pump pulley bolts to 30 Nm (22 ft lbs) using drag of drive belt to hold pulley. If additional drag is needed, attach breaker bar to
belt tensioner and apply load to belt while tightening pulley bolts.
6. Cross car brace.
7. A.I.R. filter assembly.
8. Fill Cooling system.
9. Negative battery cable.