Seville V8-300 4.9L (1991)
Figure 6 - Separating The Two Shorted Banana Plugs
17.
Separate the two banana plugs on the universal deployment harness that were shorted together in step 3. Refer to Figure 6.
NOTICE:
When the air bag deploys, the rapid gas expansion will create a substantial report. Notify all people in the immediate area of your
intention to deploy the inflator module.
NOTICE:
When the air bag deploys, the inflator module may jump approximately one foot in height. This is a normal reaction of the inflator
module to the force of the rapid gas expansion inside the air bag.
CAUTION:
Deployment harness shall remain shorted and not be connected to a power source until the air bag is to be deployed. The inflator
module will immediately deploy the air bag when a power source is connected to it. Connecting the deployment harness to the power
source should always be the last step prior to deployment in the inflator module deployment procedure. Failure to follow procedures
in the order listed may result in personal injury.
