Seville STS V8-4.6L VIN 9 (1998)
10. Disconnect the passenger yellow 2-way connector (1) located above the passenger sound insulator.
11. Remove the Connector Position Assurance (CPA) from the side air bag/pretensioner yellow 6-way connector located under the driver seat (1).
12. Disconnect the side air bag/pretensioner yellow 6-way connector (2) located under the driver seat (1).
13. Remove the Connector Position Assurance (CPA) from the side air bag/pretensioner yellow 6-way connector (2) located under the passenger front
seat (1).
14. Disconnect the side air bag/pretensioner yellow 6-way connector located under the passenger front seat (1).
Enabling the SIR System
1. Remove the key from the ignition switch.
2. Connect the passenger yellow 2-way connector (1) located above the passenger sound insulator.
3. Install the Connector Position Assurance (CPA) (2) to the passenger yellow 2-way connector (1) located above the passenger sound insulator.
4. Connect the driver yellow 2-way connector located at the base of the steering column.
5. Install the Connector Position Assurance (CPA) (2) to the driver yellow 2-way connector (1) located at the base of the steering column.