SRX 2WD V8-4.6L VIN A (2004)
Rear Bumper Reinforcement: Service and Repair
Impact Bar Replacement - Rear Bumper
Removal Procedure
1. Remove the rear bumper fascia.
2. Remove the nuts (1) that secure the impact bar (2) and the rear exhaust hangers (3) to the body (4).
3. Remove the rear impact bar (2) and the rear exhaust hangers (3).
Installation Procedure
1. Install the rear impact bar (2) and the rear exhaust hangers (3).
Notice: Refer to Fastener Notice () in Service Precautions.
