SRX 2WD V8-4.6L VIN A (2004)
Sunroof / Moonroof Hinge: Service and Repair
SUNROOF REAR VENT WINDOW HINGE PLATE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the rear vent window.
2. Place the rear vent window upside down on a clean protected surface.
3. Remove the hinge plate screws (2).
4. Remove the hinge plates (1) from the window frame (3)
INSTALLATION PROCEDURE
1. Position the hinge plates (2) to the frame on the rear vent window.
2. Loosely install the hinge plate screws (1).
NOTE: Refer to Fastener Notice in Service Precautions.
3. Move the hinge plates fully forward.
Tighten
Tighten the screws to 5 N.m (44 lb in).
4. Install the rear vent window.