SRX 2WD V8-4.6L VIN A (2004)
5. Remove the seat cushion cover (3).
6. Remove the seat cushion pad (2).
INSTALLATION PROCEDURE
1. Install the seat cushion pad (2) to the seat cushion frame (1).
2. Install the seat cushion cover (3) over the seat cushion pad (2).
3. Work the seat cushion pad (2) into position so there are no wrinkles or lumps in the seat cushion cover (3).
4. Ensure the hook and loop fasteners on the seat cushion cover and the seat cushion pad are fully engaged in order to ensure proper fit of the seat
cushion cover (3).
5. Turn the seat cushion assembly over.
6. Install the seat cushion cover J channels (1) to the seat cushion frame.
7. Install the seat cushion to the seat assembly.
8. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 7 driver's seat and SIR Disabling and Enabling Zone 9 and passenger seat.
Seat Cushion Replacement - Rear No.1 - Left
SEAT CUSHION REPLACEMENT - REAR NO.1 - LEFT
REMOVAL PROCEDURE