SRX 2WD V8-4.6L VIN A (2004)
42.
Using a small long blade screwdriver clean out any sealant in the oil drain back passages.
43.
Using a NEW oil distribution plate place a 3 mm (0.118 in) wide bead (1) of RTV sealant P/N 12378521 (in Canada use P/N 88901148) or P/N
88861417 (in Canada use 88861418) around the perimeter of the outer seal of the oil distribution plate place.
44.
Ensure the RTV sealant P/N 12378521 (in Canada use P/N 88901148) or P/N 88861417 (in Canada use 88861418) bead is inboard of all the oil
pan bolt holes.