SRX 2WD V8-4.6L VIN A (2004)
3. Use the J39946 to rotate the crankshaft until the crankshaft keyway is approximately at the 1 o'clock position.
4. Install the following as an assembly:
^
The primary camshaft drive chain (3)
^
The crankshaft sprocket
^
The camshaft intermediate sprocket
5. Notice: Refer to Fastener Notice.
Install the camshaft intermediate sprocket retaining bolt.
Tighten the camshaft intermediate sprocket retaining bolt to 60 Nm (44 ft. lbs.).