SRX 2WD V8-4.6L VIN A (2004)
4. Remove the left exhaust manifold bolts and nuts. Discard the exhaust manifold bolts.
5. Remove the exhaust manifold studs, if necessary.
6. Remove the left exhaust manifold and the gasket from the engine. Do not reuse the gasket.
7. Clean and inspect the left exhaust manifold.
Installation Procedure
1. Install a NEW exhaust manifold gasket .
2. Position the left exhaust manifold and gasket to the left cylinder head.
3. Notice:
Refer to Fastener Notice in Service Precautions.
Install the left exhaust manifold studs, nuts and NEW bolts.
^
Tighten the exhaust manifold studs to 6 Nm (53 inch lbs.).
^
Tighten the exhaust manifold nuts to 25 Nm (18 ft. lbs.).
