SRX 2WD V8-4.6L VIN A (2004)
12. Install new O-rings to the suction line.
13. Install the A/C suction line to the evaporator.
14. Install the quick connect fitting (1) to the suction line.
15. Install new O-rings to the suction line.
16. Install the A/C liquid line to the evaporator.
17. Install the quick connect fitting (1) to the liquid line.
18. Connect the inlet heater hose to the heater core.
19. Connect the outlet heater hose to the heater core.
20. Connect the negative battery cable.
21. Fill the coolant. Refer to Draining and Filling Cooling System in Cooling System.
22. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
23. Leak test the fittings of the component using J 39400-A.