SRX 2WD V8-4.6L VIN A (2004)
1. Lubricate the camshaft sensor O-ring with engine oil.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the right bank intake camshaft position sensor (2) and retaining bolt.
Tighten
Tighten the retaining bolt to 10 N.m (89 lb in).
3. Reconnect the camshaft sensor electrical connector (1).
4. Install the fuel injector sight shield.
5. Operate the engine and inspect the camshaft sensor for engine oil leaks.