SRX 2WD V8-4.6L VIN A (2004)
Clockspring Assembly / Spiral Cable: Service and Repair
INFLATABLE RESTRAINT STEERING WHEEL MODULE COIL REPLACEMENT
REMOVAL PROCEDURE
CAUTION: Refer to SIR Caution in Service Precautions.
1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3.
2. Remove the steering column trim covers.
3. Remove the wire harness assembly from the wire harness strap.
4. Remove the wire harness straps from the wire harness assembly.
5. Remove the wire harness strap from the upper tilt head assembly.
6. Remove the SIR steering wheel module coil retaining clip.
7. Remove the SIR steering wheel module coil.
8. Remove the wave washer from the steering column upper shaft.
INSTALLATION PROCEDURE
1. Align the block tooth on the upper shaft (1) to the 12 o'clock position.
NOTE: Ensure all fasteners are securely seated before applying needed torque. Failure to do so may result in component damage or malfunctioning of
steering column.
2. Install the wave washer (1) to the steering column upper shaft.
IMPORTANT:
