SRX 2WD V8-4.6L VIN A (2004)
Seat Belt: Service and Repair
Front
SEAT BELT REPLACEMENT - FRONT
REMOVAL PROCEDURE
CAUTION: Refer to SIR Caution in Service Precautions.
1. Remove the front seat back trim cover.
2. Remove the front seat cover and pad.
3. Remove the screws retaining the roller assembly cover and remove the cover.
4. Remove the bolt retaining the seat belt retractor to the seat frame.
5. Remove the seat belt lower retaining nut (2).
6. Remove the seat belt retractor assembly.
INSTALLATION PROCEDURE