SRX 2WD V8-4.6L VIN A (2004)
Steering Shaft: Service and Repair
Seal Replacement - Intermediate Steering Shaft
Seal Replacement - Intermediate Steering Shaft
Removal Procedure
1. Caution: Refer to SIR Caution in Service Precautions.
Important: The steering column is removed with the upper intermediate shaft attached.
Remove the steering column.
2. Remove the intermediate shaft seal from the mod plate.
Installation Procedure
1. Install the intermediate shaft seal to the mod plate, ensuring the seal between the intermediate shaft seal and mod plate.
2. Install the steering column.
3. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in Air Bags and Seat Belts.