SRX 2WD V8-4.6L VIN A (2004)
Tighten the nuts to 135 Nm (96 ft. lbs.).
4. Tighten the power steering gear retaining bolts.
Tighten the bolts to 120 Nm (89 ft. lbs.).
5. Install the lower control arm to steering knuckle nut.
1. Tighten the nut to 40 Nm (30 ft. lbs.).
2. Tighten the nut to an additional 120 degrees.
6. Install the ABS wire harness to the lower control arm.
