SRX 2WD V8-4.6L VIN A (2004)
Wheel Bearing: Service and Repair
Front
Wheel Bearing/Hub Replacement - Front (RWD)
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the brake rotor. Refer to Brake Rotor Replacement - Front in Disc Brakes.
4. Disconnect the ABS electrical connector.
5. Remove the electrical connector from the splash shield.
6. Remove the wheel bearing/hub mounting bolts.
7. Remove the wheel bearing/hub.
Installation Procedure