SRX AWD V6-3.0L (2010)
4. Align the drive cable retaining tab (1) with the end of the guide extension (2), as shown above, on both the right and left sides.
Note: Installing the sunshade motor will keep the cables in alignment, and not allow them to move when installing the sunshade.
5. Install the sunroof sunshade motor. Refer to Sunroof Sunshade Motor Replacement (See: Sunroof Sunshade Motor Replacement).
Note: The graphics for steps 6,7,8 and 9 are mirror image for the right and left sides.
6. Pull the sunshade crossbar forward enough to access the pockets (1) sewn in the underside of the sunshade fabric and install the white sunshade
guide clip (2) into the pockets.
