SRX AWD V6-3.0L (2010)
12. Ensure the sunshade is routed properly into the side frame tracks (1) and the front crossbar is fully seated into the retaining clips (2), on both sides.
Note: Add blue LOCTITE to all the fastening screws prior to reinstalling the sunroof windows.
13. Install the rear sunroof window. Refer to Sunroof Window Replacement - Rear (See: Sunroof / Moonroof Panel/Service and Repair/Sunroof
Window Replacement - Rear).
14. Install the front sunroof window. Refer to Sunroof Window Replacement - Front (See: Sunroof / Moonroof Panel/Service and Repair/Sunroof
Window Replacement - Front).
15. Reinitialize/teach the sunroof motors. Refer to Sunroof Motor/Actuator Initialization/Teach Process (See: Sunroof / Moonroof Motor/Testing and
Inspection).
16. Reposition the headliner and the left rear door opening weatherstrip.
17. Install the left quarter upper trim finish panel and left body side trim panel. Refer to Quarter Upper Trim Panel Replacement (See: Interior
Moulding / Trim/Trim Panel/Service and Repair/Quarter Upper Trim Panel Replacement).
18. Install the rear end trim finish panel and floor panel rails. Refer to Rear End Trim Finish Panel Replacement (See: Interior Moulding / Trim/Trim
Panel/Service and Repair/Rear End Trim Finish Panel Replacement).
19. Install the rear compartment floor stowage cover assembly.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
20. Install the rear luggage shade and the left luggage shade bolt, if equipped.