SRX AWD V6-3.0L (2010)
Sun Shade: Service and Repair
Sunroof Sunshade Replacement
Sunroof Sunshade Replacement
Removal Procedure
Note: It is Not necessary to remove the sunroof assembly to replace the sunshade.
1. Open the sunshade to the fully open position.
2. Remove the window. Refer to Sunroof Window Replacement - Rear (See: Sunroof / Moonroof Panel/Service and Repair/Sunroof Window
Replacement - Rear).
3. It is only necessary to lower the headliner. Only do those step in headliner replacement that will lower the headliner enough to gain access to the
part. Refer to Headlining Trim Panel Replacement (With C3U) (See: Interior Moulding / Trim/Headliner/Service and Repair/Headlining Trim
Panel Replacement (With C3U))Headlining Trim Panel Replacement (Without C3U) (See: Interior Moulding / Trim/Headliner/Service and
Repair/Headlining Trim Panel Replacement (Without C3U)).
4. Remove the white plastic retainers by sliding them rearward and disengage them from the track.
5. Release the cable guides tabs (1) located at each corner of the sunshade (2).
6. Allow the sunshade to return to a hard stop and release the tension.