cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Procedures|Page 9996 > < Procedures|Page 9994
Page 2
background image

5. Disconnect the grommet from the drain hose.
6. Remove the hose from the vehicle

Installation Procedure

1. Install the hose to the vehicle
2. Pull the hose out through the hole in the front hinge pillar.
3. Install the grommet onto the end of the hose.
4. Install the grommet into the hole in the front hinge pillar.

5. Connect the hose to the attachments on the windshield pillar.
6. Connect the front sunroof drain hose to the sunroof drain spigot.
7. Water test the vehicle before installing the headliner.
8. Install the headliner. Refer to Headlining Trim Panel Replacement (With C3U)   (See: Interior Moulding / Trim/Headliner/Service and

Repair/Headlining Trim Panel Replacement (With C3U))Headlining Trim Panel Replacement (Without C3U)   (See: Interior Moulding /
Trim/Headliner/Service and Repair/Headlining Trim Panel Replacement (Without C3U)).

9. Inspect sunroof for proper operation.

Procedures|Page 9996 > < Procedures|Page 9994