SRX AWD V6-3.0L (2010)
3. Position the brake hose to the bracket.
4. Install the front brake hose retaining clip (1).
5. Install the brake pipe fitting (1) to the front brake hose and tighten to 19 Nm (14 lb ft).
6. Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding (Manual) (See: Brake Bleeding/Service and Repair)Hydraulic
Brake System Bleeding (Pressure) (See: Brake Bleeding/Service and Repair).
7. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).