SRX AWD V6-3.0L (2010)
Brake Booster Vacuum Sensor: Service and Repair
Power Brake Booster Vacuum Sensor Replacement
Removal Procedure
1. With the engine OFF, apply and release the brake pedal several times until the brake pedal becomes firm to deplete the power vacuum brake
booster vacuum reserve.
Note: Lift the dash panel insulator slightly to remove the upper master cylinder heat shield nut.
2. If equipped with the master cylinder heat shield, remove the master cylinder heat shield nuts (1).
3. Remove the master cylinder heat shield bolt (1).
4. Remove the master cylinder heat shield.