SRX AWD V6-3.0L (2010)
Heater Hose: Service and Repair
Heater Inlet Hose Replacement
Heater Inlet Hose Replacement (LF1)
Special Tools
BO 38185 - Hose Clamp Pliers
For equivalent regional tools. Refer to Special Tools (See: Heating and Air Conditioning/Tools and Equipment)
Removal Procedure
1. Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill LF1) (See: Service and Repair/Cooling System Draining and
Filling (Static Fill))Cooling System Draining and Filling (GE 47716) (See: Service and Repair/Cooling System Draining and Filling (GE 47716)
)Cooling System Draining and Filling (Static Fill LAU) (See: Service and Repair/Cooling System Draining and Filling (Static Fill))
2. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement (See: Engine/Intake Manifold/Service and Repair/Intake
Manifold Cover Replacement)
3. Disengage tension on the heater inlet hose clamp (1) at the engine using BO 38185 - Hose Clamp Pliers.
4. Remove the heater inlet hose (2) from the engine.