SRX AWD V6-3.0L (2010)
Intake Manifold: Service and Repair
Upper Intake Manifold Replacement
Upper Intake Manifold Replacement
Removal Procedure
1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement (See: Intake Manifold Cover Replacement).
2. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (LF1) (See: Tune-up and Engine Performance Checks/Air
Cleaner Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair/Air Cleaner Outlet Duct Replacement)Air Cleaner Outlet Duct
Replacement (LAU) (See: Tune-up and Engine Performance Checks/Air Cleaner Housing/Air Cleaner Fresh Air Duct/Hose/Service and
Repair/Air Cleaner Outlet Duct Replacement).
3. Disconnect evaporative pipes as needed.
4. Remove the engine coolant air pipe. Refer to Engine Coolant Air Bleed Pipe Replacement (LF1) (See: Cooling System/Coolant
Line/Hose/Service and Repair)Engine Coolant Air Bleed Pipe Replacement (LAU) (See: Cooling System/Coolant Line/Hose/Service and Repair
).
5. Remove the charge air cooler outlet duct. Refer to Charge Air Cooler Outlet Duct Replacement ().
6. Remove the secondary air injection pump pipe. Refer to Secondary Air Injection Pump Pipe Replacement (See: Powertrain
Management/Emission Control Systems/Air Injection/Air Injection Hose/Tube/Service and Repair/Secondary Air Injection Pump Pipe
Replacement).
7. Remove the fuel injector wiring harness plug from fuel injector wiring harness bracket.