SRX AWD V6-3.0L (2010)
Catalytic Converter: Service and Repair
Catalytic Converter Replacement - Left Side
Catalytic Converter Replacement - Left Side (LF1)
Removal Procedure
Warning: Refer to Hot Exhaust System Warning (See: Service Precautions/Technician Safety Information/Hot Exhaust System Warning).
Warning: Refer to Safety Glasses Warning (See: Service Precautions/Technician Safety Information/Safety Glasses Warning).
1. Disconnect the heated oxygen sensor before and after the left catalytic converter.
2. Remove the left catalytic converter nuts (1) to left cylinder head. Replace gasket (2) with a new one.
3. Remove the nuts (1) to the rear muffler assembly.
4. Remove the nuts (2) from the right catalytic converter.
