SRX AWD V6-3.0L (2010)
Power Steering Line/Hose: Service and Repair
Power Steering Gear Outlet and Fluid Reservoir Inlet Hose Replacement (LHD)
Power Steering Gear Outlet and Fluid Reservoir Inlet Hose Replacement (LF1 LHD)
Removal Procedure
1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair/Intake Manifold Cover Replacement).
2. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (LF1) (See: Filters/Air Cleaner Housing/Air Cleaner Fresh Air
Duct/Hose/Service and Repair/Air Cleaner Outlet Duct Replacement)Air Cleaner Outlet Duct Replacement (LAU) (See: Filters/Air Cleaner
Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair/Air Cleaner Outlet Duct Replacement).
3. Remove as much power steering fluid from the power steering fluid reservoir as possible.
4. Place drain pans under the vehicle.
5. Loosen the hose clamp (1) and disconnect the power steering fluid reservoir inlet hose from the power steering fluid reservoir.
6. Remove the right front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair).
7. Remove the right front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement (See: Body and Frame/Fender/Front Fender/Front
Fender Liner/Service and Repair).