SRX AWD V6-3.0L (2010)
9. Connect the power steering fluid reservoir inlet hose to the power steering fluid reservoir and secure with the hose clamp (1).
10. Remove the drain pans.
11. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (LF1) (See: Filters/Air Cleaner Housing/Air Cleaner Fresh Air
Duct/Hose/Service and Repair/Air Cleaner Outlet Duct Replacement)Air Cleaner Outlet Duct Replacement (LAU) (See: Filters/Air Cleaner
Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair/Air Cleaner Outlet Duct Replacement).
12. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair/Intake Manifold Cover Replacement).
13. Fill and bleed the power steering system. Refer to Power Steering System Bleeding (See: Steering and Suspension/Steering/Power
Steering/Power Steering Bleeding/Service and Repair).
14. Clean any excess power steering fluid from the vehicle.
