SRX AWD V6-3.0L (2010)
Installation Procedure
1. Install the adjuster switch (1) to the steering column.
Note: Ensure the brake and accelerator pedal adjuster switch harness is correctly routed and secure.
2. Connect the brake and accelerator pedal adjuster switch electrical connector.
3. Install the lower steering column shroud (1). Refer to Steering Column Shroud Replacement (See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Steering Column Shroud Replacement).
4. Enable the SIR system. Refer to SIR Disabling and Enabling (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air
Bag(s) Arming and Disarming/Service and Repair).