SRX AWD V6-3.0L (2010)
Positive: Service and Repair
Battery Positive and Negative Cable Replacement
Battery Positive and Negative Cable Replacement (LF1)
Removal Procedure
1. Remove the ground wire terminal on the negative battery clamp.
2. Disconnect the current sensor from the engine harness.
3. Remove the negative battery cable clamp (1) and the left front radiator support ground terminal (2).
4. Remove the battery fuse block cover (1).
5. Remove the battery positive nut (2) from battery fuse block and detach retainer (3) from the battery tray.