SRX AWD V6-3.0L (2010)
Starter Motor: Service and Repair
Starter Replacement (LF1)
Removal Procedure
1. Turn OFF the ignition.
2. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (See: Battery/Battery
Cable/Negative/Service and Repair/Battery Negative Cable Disconnection and Connection).
3. Remove the heat shield (2) from the starter.
4. Remove the left catalytic cylinder head nuts and reposition catalytic converter away from cylinder head.
5. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair)
6. Disconnect the knock sensor connector.
7. Remove the battery positive nut (1) and the engine harness connector (2), from the starter solenoid (3).