SRX AWD V6-3.0L (2010)
Installation Procedure
1. Install the transaxle mount (1).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the NEW transaxle mount bolts (2) and tighten to 62 Nm (46 lb ft).
3. Install the transaxle mount through bolt (1) and tighten to 100 Nm (74 lb ft).
4. Lower the vehicle.
Transmission Rear Mount Replacement
Transmission Rear Mount Replacement