SRX AWD V6-3.0L (2010)
8. Using the DT 35910 - pliers , breaker bar, torque wrench and or ratchet (1) , close the boot clamp (2) until the gap (3) measures 2.15 mm (0.085
in).
9. Using the DT 35910 - pliers (3), breaker bar (5), torque wrench and or ratchet (4), close the clamp until the gap (6) measures 1.9 mm (0.070 in).
10. Rotate the housing in a circular motion to distribute the grease in the tripot joint.
11. Install the wheel drive shaft to the vehicle.
*
For the left wheel drive shaft, refer to Front Wheel Drive Shaft Replacement - Left Side (See: Service and Repair).
*
For the right wheel drive shaft, refer to Front Wheel Drive Shaft Replacement - Right Side (See: Service and Repair).