SRX AWD V6-3.6L (2008)
Pedal Positioning Motor: Service and Repair
Brake and Accelerator Pedal Adjuster Actuator Motor Replacement (RHD)
Brake and Accelerator Pedal Adjuster Actuator Motor Replacement (RHD)
Removal Procedure
1. Remove the adjustable accelerator pedal from the vehicle. Refer to Accelerator Pedal Assembly Replacement (LHD) (See: Service and
Repair/Removal and Replacement/Accelerator Pedal Assembly Replacement (LHD))Accelerator Pedal Assembly Replacement (RHD) (See:
Service and Repair/Removal and Replacement/Accelerator Pedal Assembly Replacement (RHD)) .
2. To release the adjustable pedal cable from the adjustable pedal motor, carefully compress the collar of the cable and pull outward from the motor.
Important: Only remove the staked material or the head of the insert.
3. To remove the head of the factory motor inserts use a 3/16 inch drill bit. Carefully drill the head of the factory motor insert (2) from the bottom
side of the adjustable pedal motor bracket (4).
4. Remove the adjustable pedal motor.
Installation Procedure
1. Position the adjustable brake pedal motor to the adjustable brake pedal motor bracket.
Important: Remove the new motor inserts, reuse original inserts.