SRX AWD V6-3.6L (2008)
Pedal Positioning Switch: Service and Repair
Brake and Accelerator Pedal Adjuster Switch Replacement
Removal Procedure
Caution: Refer to SIR Caution (See: Restraint Systems/Service Precautions/Technician Safety Information/SIR Caution) .
1. Disable the SIR system. Refer to SIR Disabling and Enabling (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air
Bag(s) Arming and Disarming/Service and Repair) .
2. Disconnect the adjuster pedal switch connector at the base of the steering column.
3. Remove the wire harness straps from the wire harness assembly.
4. Remove the adjuster pedal switch lead from the wire harness assembly.
5. Remove the 2 pan head tapping screws (2) from the lower trim cover (1).
6. Remove the lower trim cover (2).
7. Remove the adjuster pedal switch assembly (2) from the lower trim cover (1).
8. Remove the TORX(R) head screw (2) from the upper trim cover (1).
9. Remove the upper trim cover (1).
Installation Procedure