SRX AWD V6-3.6L (2008)
2. Disconnect the electrical connector (1).
3. Remove the screws (3) securing the speaker (2) to the door frame.
4. Remove the speaker from the door.
Installation Procedure
1. Connect the electrical connector.
2. Install the speaker onto the door frame.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
3. Install the screws (3) securing the speaker (2) to the door frame.
Tighten the screws to 2 N.m (18 lb in).
4. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement (See: Body and Frame/Doors, Hood and Trunk/Doors/Front
Door/Front Door Panel/Service and Repair) .