SRX AWD V6-3.6L (2008)
1. Install the front impact bar.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the nuts in order to secure the impact bar to the front frame rail.
Tighten the nuts to 25 N.m (18 lb ft).
3. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement (See: Front Bumper Cover / Fascia/Service and Repair/Front Bumper
Fascia Replacement) .
4. Lower the vehicle.