SRX AWD V6-3.6L (2008)
1. Clean the water deflector to the inner door panel mating surface with denatured alcohol or the equivalent.
2. Align the water deflector to the door assembly.
3. Route the inside door handle rod through the opening in the water deflector.
4. Install the push-in fasteners at the corners of the water deflector.
5. Seat the water deflector to the door using a rolling tool.
6. Install the inside door handle. Refer to Front Side Door Inside Handle Replacement (See: Front Door Handle/Front Door Interior Handle/Service
and Repair) .
7. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement (See: ) .