SRX AWD V6-3.6L (2008)
Rear Door Weatherstrip: Service and Repair
Rear Door Opening Weatherstrip Replacement
Rear Door Opening Weatherstrip Replacement
Removal Procedure
1. Remove the carpet retainer. Refer to Rear Carpet Retainer Replacement (See: Interior Moulding / Trim/Carpet/Service and Repair) .
2. Start at the rear upper corner of the door opening and pull the weatherstrip away from the door opening flange.
3. Work around the door opening to remove the weatherstrip.
Installation Procedure
1. Position the weatherstrip in the upper corner of the center pillar.
Important: The rubber side of the weatherstrip should be outboard of the car.