SRX AWD V6-3.6L (2008)
7. With the aid of an assistant, use the suction cups in order to lift the liftgate window (2) from the opening.
Installation Procedure
1. Install the stationary window into the opening. Refer to Adhesive Installation of Stationary Windows (See: Windows and Glass/Windows/Service
and Repair/Adhesive Installation of Stationary Windows) .
2. Reconnect the rear window defogger connector.
3. Install the wiper motor. Refer to Liftgate Wiper Motor Replacement (See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Liftgate
Wiper Motor Replacement) .
4. Install the liftgate trim panel. Refer to Liftgate Trim Panel Replacement (w/o TB5) (See: Interior Moulding / Trim/Trim Panel/Service and Repair
)Liftgate Trim Panel Replacement (w/TB5) (See: Interior Moulding / Trim/Trim Panel/Service and Repair) .
5. Close the liftgate.
6. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
