SRX AWD V6-3.6L (2008)
2. If the location of the emblem/nameplate has not been marked, apply tape and use the following dimensions:
*
a - 130 mm (5.12 in) from the horizontal edge of the liftgate
*
b - 80 mm (3.12 in) from the vertical edge of the liftgate
*
c - Export unit only - 12 mm (0.5 in) from the bottom edge of the "SRX" emblem
3. If the location of the emblem has not been marked, apply tape and use the following dimensions:
*
a - 5 mm (0.2 in) from the horizontal top edge of the liftgate applique
*
b - 23 mm (0.9 in) from the horizontal top edge of the liftgate applique
