SRX AWD V6-3.6L (2008)
Cowl Moulding / Trim: Service and Repair
Air Inlet Grille Panel Replacement
Removal Procedure
1. Remove the windshield wiper arms. Refer to Windshield Wiper Arm Replacement (See: Wiper and Washer Systems/Wiper Arm/Service and
Repair/Windshield Wiper Arm Replacement) .
2. Remove the upper air inlet panel fasteners.
3. Remove the upper air inlet panel.
4. Remove the lower air inlet panel fasteners.
5. Remove the lower air inlet panel support bracket retainer from the master cylinder mounting stud.
6. Remove the lower air inlet panel.