cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Eliminating Unwanted Odors in Vehicles|Page 18355 > < Eliminating Unwanted Odors in Vehicles|Page 18353
Page 1
background image

Carpet: Service and Repair
Front Floor Panel Carpet Replacement

Front Floor Panel Carpet Replacement

Removal Procedure

Caution:  Refer to SIR Caution  (See: Restraint Systems/Service Precautions/Technician Safety Information/SIR Caution) .

Caution:  In order to prevent SIR deployment, personal injury, or unnecessary SIR system repairs, do not strike the door or the door pillar in the
area of the side impact sensor (SIS). Turn OFF the ignition and remove the key when performing service in the area of the SIS.

1. Remove the appropriate front seat. Refer to Front Carpet Retainer Replacement  (See: ) .
2. Remove the center console. Refer to Front Floor Console Replacement (Left Hand Drive)  (See: Console/Service and Repair)Front Floor Console

Replacement (Right Hand Drive)  (See: Console/Service and Repair) .

3. Remove the front carpet retainer. Refer to Front Carpet Retainer Replacement  (See: ) .
4. Remove the rear carpet retainer. Refer to Rear Carpet Retainer Replacement  (See: ) .
5. Remove the center pillar garnish molding. Refer to Center Pillar Garnish Molding Replacement  (See: Trim Panel/Service and Repair) .
6. Remove the carpet (1,2).

Installation Procedure

Caution:  In order to avoid personal injury or vehicle damage when you repair or replace the carpet, use the same thickness and material size as
the original installation. Always return the carpet to the original location.

Caution:  All floor pan insulator material must meet Federal Vehicle Safety Standards for flammability. Failure to do so could result in personal
injury and/or vehicle damage.

1. Position the front floor carpet (1,2) into place over the front edge of the rear carpet.
2. Make sure the electrical connector (5) is carefully positioned under the front carpet piece.
3. Align the carpet to the dash panel, rocker panel, tunnel and seat attachment areas.
4. Tuck the carpet behind the tab on the HVAC duct.
5. Ensure all wrinkles are removed.
6. Install the center console. Refer to Front Floor Console Replacement (Left Hand Drive)  (See: Console/Service and Repair)Front Floor Console

Replacement (Right Hand Drive)  (See: Console/Service and Repair) .

7. Install the center pillar garnish molding. Refer to Center Pillar Garnish Molding Replacement  (See: Trim Panel/Service and Repair) .
8. Install the front carpet retainer. Refer to Front Carpet Retainer Replacement  (See: ) .
9. Install the rear carpet retainer. Refer to Rear Carpet Retainer Replacement  (See: ) .

10. Install the front seat. Refer to Bucket Seat Replacement  (See: Seats/Service and Repair/Removal and Replacement/Bucket Seat Replacement) .

Eliminating Unwanted Odors in Vehicles|Page 18355 > < Eliminating Unwanted Odors in Vehicles|Page 18353