SRX AWD V6-3.6L (2008)
1. Position the console rear upper trim cover to the console.
2. Push down firmly ensuring the console rear upper trim cover retaining clips engage securing the cover to the console assembly.
3. Open the DVD screen to the viewing position.
Install the console rear lower trim cover.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
4. Install the console rear lower trim cover retaining screws.
Tighten the screws to 2 N.m (18 lb in).
Front Floor Console Replacement (Left Hand Drive)
Front Floor Console Replacement (Left Hand Drive)
