SRX AWD V6-3.6L (2008)
3. Align the retainers on the garnish molding (1) with the holes in the body pillar.
4. Push the panel inward in order to secure the retainers.
5. Install the liftgate rod cover and liftgate rod.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
6. Install the seat belt retractor anchor bolt (3). Ensure that the belt is not twisted.
Tighten the bolt to 45 N.m (33 lb ft).
7. Install the seat belt retractor guide bolt (1). Ensure that the belt is not twisted.
Tighten the bolt to 70 N.m (52 lb ft).