SRX AWD V6-3.6L (2008)
5. Align the outboard clips around the window opening with the slots in the trim panel. Press the panel (1) into position.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
6. Install the liftgate screw (1).
Tighten the screw to 2 N.m (18 lb in).
Liftgate Trim Panel Replacement (w/TB5)
Liftgate Trim Panel Replacement (w/TB5)
Removal Procedure
